TWIST | Cangini Benne Skip to content

TWIST

It is the strongest ally for the maintenance of banks, the construction of channels and the civil engineering works. Twist enables the bucket to increase its tilt angle – up to 90° on each side – and to reach positions otherwise inaccessible with a standard equipment (coupler + tool).

The Twist hydraulic actuator provides multiple working angles, enabling the tool to reach positions well-beyond the limits of standard machine arm movement, enhancing its versatility. This characteristic is essential for effective work on site, where a well-done job carried out in short time is a key factor in work profitability. Twist enables the bucket to increase its tilt angle – up to 90° on each side – and to reach positions otherwise inaccessible with standard equipment (coupler + tool). Machine effectiveness increases greatly: the wider tilt angle optimizes its range of action.
No need to re-position the machine on the site as often: by keeping the machine static, the operator can easily work in multiple positions, reaching wider work areas in less time. The direct consequences are manifold as well as the advantages: wear, clutches and breakages rot, the engine strains less, maintenance interventions decrease as well as fuel consumption. A single operator is able to complete multiple tasks quickly, reducing downtime and increasing work yield.

EFFECTIVENESS

Thanks to its 90° tilt on each side, it can reach work positions otherwise inaccessible with standard equipment.

inclinazione twist

HIGH PERFORMANCE

Its compact body optimizes machine performance.

SAFETY

An integral check valve, fitted as standard, allows Twist to hold its position in case of pressure loss on the hydraulic line.

Gallery