TILTING DITCH CLEANING BUCKET SQS 8° GD
Bidirectional tilting up to 45° makes the general duty tilting 8° ditch cleaning bucket particularly useful for maintenance and construction jobs on sloping ground. The elongated profile, tapered shape and conical rear with 8° angle facilitate the discharge of materials because they prevent earth from sticking to the sides and enable it to slide more easily. Due to its characteristics, this bucket is particularly popular in Scandinavian countries.
Thanks to the HB400 steel reinforcing bands welded to the bottom, an area subject to heavy stresses, and the extra-hard cast steel teeth, Cangini heavy duty buckets are especially rugged and deliver a long working life.
Cast cutting blades fitted in the critical zones increase the ruggedness of the structure, and side reinforcements enhance wear resistance.
The reinforced blade is entirely in HB400 steel.
The distinctive design of these Cangini buckets ensures higher load capacity, while the angled shape reduces resistance to the terrain, for quicker, easier penetration. The result is more filling and better digging.
The wide range of models (12) allows the perfect match for every excavator, providing the best performance for each specific class and application from 0.8 to 22 ton.
The advantages increase even more in combination with the Twist system, enabling the bucket to tilt up to 90° on either side, or Rototwist, allowing 55° tilt and 360° rotation.
The elongated profile and conical rear with 8° angle facilitate the discharge of material.
The check valve fitted as standard ensures that bucket position is maintained during work for maximum safety.
The horizontal reinforcement bands and the HB400 high-strength steel blade protect the bucket from wear and maintain its penetration capacity intact over time.